Filter
Top Products
4
Chapter 4 Adjustments and Settings for Recording4-56
Item Content
BATT
TYPE Selects the type of the battery (LITHIUM,
DIGITAL, OTHERS1 OTHERS2, AC
ADP)
BEFORE END Displays the ALARM voltage set on the
MAINTENANCE menu.
a)
END Displays the END (shutdown) voltage set on
the MAINTENANCE menu.
a)
DC IN
TYPE Selects the type of the battery input to the
DC IN connector (LITHIUM, DIGITAL,
OTHERS1, OTHERS2, AC ADP)
BEFORE END Displays the ALARM voltage set on the
MAINTENANCE menu.
a)
END Displays the END voltage set on the
MAINTENANCE menu.
a) When AC ADP is selected, “ - - ” appears at the position where
the voltage should be displayed, that is, no values are displayed.
3 Turn the MIC/MENU knob to move the arrow (→) to the item you
want to set, and push the MIC/MENU knob.
The arrow (→) changes to a question mark (?).
4 Turn the MIC/MENU knob to change the desired setting, and push
the MIC/MENU knob.
The question mark (?) changes back to the arrow (→) to confirm the
setting.
5 To continue setting other items, repeat steps 3 and 4.