Filter
Top Products
4
Chapter 4 Adjustments and Settings for Recording 4-89
If data cannot be written
If one of the following error messages appears when you push the MIC/
MENU knob in step 4 of the procedure in the previous section (page 4-
87), then the data was not written.
Data write error messages
Error message
NO MEMORY
STICK
MEMORY STICK
LOCKED
MEMORY STICK
ERROR (flashing)
Reason
No memory stick is
inserted.
The write protect switch on
the memory stick is set to
the write protect position.
Circuit or memory stick
fault.
Action
Insert or reinsert the memory
stick.
Set the write protect switch
to the write enable position.
Check the circuitry, or
replace the memory stick .