Filter
Top Products
2
Chapter 2 Locations and Functions of Parts and Controls2-36
1 TALLY indicator
Setting the TALLY switch to HIGH or LOW activates this indicator. The
indicator lights during recording on the VTR. It also provides the same
information as the REC indicator in the viewfinder; it lights up during
recording and flashes to indicate a problem. The brightness of this
indicator when it is lit can be controlled by the TALLY switch.
2 TALLY switch
This switch controls the TALLY indicator, setting its brightness (HIGH
or LOW) or turning it off.
HIGH: The TALLY indicator gets brighter.
OFF: The TALLY indicator does not operate.
LOW: The TALLY indicator gets dimmer.
3 DIAG (self-diagnostics) button
Pressing this button when the VTR is stopped switches the camcorder to
self-diagnostics mode. In self-diagnostics mode, it is possible to carry
out a display panel test, a VTR test, or a camera test and display the test
result.
To exit from self-diagnostics mode, press this button once more.
For more information, refer to the Maintenance Manual.
4 BACK TALLY indicator
This indicator functions exactly the same way as the front tally indicator
when the BACK TALLY switch is set to ON.
5 BACK TALLY switch
This switch enables (ON) or disables (OFF) the operation of the BACK
TALLY indicator.
ON: Enables the BACK TALLY indicator operation
OFF: Disables the BACK TALLY indicator operation