Filter
Top Products
3
Chapter 3 Recording and Playback3-4
Cassette lid
Push the plug in. To
reuse the cassette,
return the plug to its
original position.
Unloading a cassette manually
If the battery voltage drops below about 10.5 V, take out the cassette
manually as illustrated below.
Unloading a cassette manually
You need not return the screw to its original position after taking out the
cassette. Although the cassette lid is not locked, turning on the power
makes the cassette lid operable again.
3-1-2 Preventing Accidental Erasure
The following procedure prevents cassettes from being recorded
inadvertently.
Preventing accidental erasure
1 Turn the power off.
2 Open this rubber cover.
3 Pushing on the screw inside
with a screwdriver, turn
the screw counterclockwise
until the cassette lid opens.