Filter
Top Products
2
Chapter 2 Locations and Functions of Parts and Controls 2-19
qf SHUTTER selector
Set this selector to ON to use the electronic shutter. Set it to SEL to
switch the shutter speed or mode setting within the range that has been
previously set from the setup menu.
When this selector is adjusted, the new setting will be indicated on the
setting change/adjustment progress message display area for about 3
seconds.
For more information about the shutter speed and mode settings, see Section 4-2
“Setting the Electronic Shutter” (page 4-9).
qg MIC/MENU knob
When the DISPLAY switch is set to ON or when the lens is using the
automatic iris operation with the DISPLAY switch set to OFF, pressing
and turning the MIC/MENU knob sets the iris override (±1 iris in 1/4 iris
steps). The iris override setting returns to 0 when you turn off the
camcorder, then on again.
qh AUTO W/B BAL (automatic white/black balance adjustment)
switch
This switch activates the white balance and black balance automatic
adjustment functions.
WHT: Automatic adjustment of the white balance. If the WHITE BAL
switch is set to A or B, the white balance setting is stored in the
corresponding memory. The memory can store the white balance
setting for each CC filter.
BLK: Automatic adjustment of the black set and black balance.