Filter
Top Products
2
Chapter 2 Locations and Functions of Parts and Controls 2-39
H MIN SEC FRM
40
PEAK dB
OVER
EMPH
OVER
TAPE E B
HOLDDIAG PB VITC NDF EXT-LK
RF SERVO HUMID SLACK
BATT E F
30
10
0
20
VTR operation status and status indicators
VTR operation and status indicators
Note
If the tape in the VTR becomes slackened, an error code appears
automatically on the display section of the display panel.
For more information refer to the Maintenance Manual.
Lights in the self-diagnostic mode (testing
display panel, camera, and VTR).
For more information, refer to the
Maintenance Manual.
Lights during playback.
Warning indicators
RF: Lights if the recording heads are clogged.
SERVO: Lights if the servo motor fails.
HUMID: Lights if condensation is on the drum.
SLACK: Lights if the tape is not winding properly.
For more information, see Section 6-3 “Operation Warnings” (page 6-14).