Filter
Top Products
4
Chapter 4 Adjustments and Settings for Recording 4-47
You can select displaying or not-displaying for the following item.
Item Contents
MARKER
a)
Not to display all markers, set to OFF.
CENTER To display the center marker, set to ON. If
this item is set to ON, you can select the type
of center marker (1 to 4).
SAFETY ZONE To display the safety zone, set to ON. If this
item is set to ON, you can set the safety zone
range (80%, 90%, 92.5%, or 95%).
EFFECT To display the effective pixel area, set to ON.
ASPECT MODE Select the aspect mode among 16:9, 15:9,
14:9, 13:9, 4:3, VAR H, VAR V, VISTA 1 or
VIST 2.
MASK To make the areas out of the selected aspect
marker dimmer, set to ON. If this item is set
to ON, you can set the mask level
(0 to 100 %).
VAR WIDTH Effective only when VAR H or VAR V is
selected at the ASPECT MODE item.
VAR H: You can change the aspect size
horizontally.
VAR V: You can change the aspect size
vertically.
a) The DISPLAY/ASPECT switch on the viewfinder allows you to
display or not display the corresponding item. The menu
settings are also changed according to the operation of this
switch.
(Continued)