Filter
Top Products
3
Chapter 3 Recording and Playback3-6
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
3 Check that there are no obstructions near the cassette lid. Then press
the EJECT button to open the cassette lid.
4 After checking the points below, load the cassette and close the
cassette lid.
• The cassette is not write-protected.
• There is no slack in the tape.
Basic procedure for shooting: from adjusting the
black balance and white balance to stopping recording
After turning on the power and loading a cassette, set the switches and
selectors as shown below and begin operation.
Switch and selector settings before shooting
F-RUN/SET/R-RUN:
F-RUN or R-RUN
(set as needed)
Iris: Automatic
AUDIO SELECT
CH-1/CH-2:
AUTO
Zoom:
Automatic
GAIN: Set as low
as possible.
OUTPUT/DCC:
CAM, DCC ON