Filter
Top Products
4
Chapter 4 Adjustments and Settings for Recording4-6
2 Adjust the FILTER selector to suit the lighting conditions.
ND filter CC filter
1 Clear A Cross filter
2 1/4 ND B 3200K
3 1/16 ND C 4300K
4 1/64 ND D 6300K
If the setting of the FILTER selector is changed, a message reporting
the setting appears for about 3 seconds in the setting change and
adjustment progress message display area of the viewfinder screen.
3 Place a white test card under the same lighting conditions as the
subject to be shot and zoom up to it. Alternately, any white object
such as a cloth or a wall could be used.
The absolute minimum white area is as follows:
Rectangle centered on the
screen. The lengths of the
sides are 70% of the length
or the width of the screen.
The white object must be
within the rectangle and
have an area of at least
10% of the screen.