Filter
Top Products
3
Chapter 3 Recording and Playback3-8
When the black balance and white balance settings are already in
memory:
Set the WHITE BAL switch to A or B.
When the white balance setting is not in memory and you do not
have enough time to adjust the white balance:
Set the WHITE BAL switch to the PRST position. The white
balance is automatically set to 3200 K when the FILTER selector is
set to B, to 4300 K when the FILTER selector is set to C, and to
6300 K when the FILTER selector is set to D.
For more information, see Section 4-1-2 “Adjusting the White Balance”
(page 4-5).
3 Aim the camera at the subject and adjust the focus and zoom.
4 If necessary, set the electronic shutter for an appropriate mode and
speed.
For more information, see Section 4-2 “Setting the Electronic Shutter”
(page 4-9).
5 To start recording, press the VTR START button or the VTR button
on the lens.
Or if the VTR S/S function is assigned to either of the assignable
switches 1/2, these assignable switches function as VTR START/
STOP buttons.
For details, see “4-7-8 Setting the D5600K Mode and Assignable Switches”
on page 4-57.
During recording, the REC indicator in the viewfinder goes on.
Perform zooming and focus control, if necessary.
6 To stop recording, press the VTR START button or the VTR button
on the lens again.
The REC indicator goes off.