Filter
Top Products
4
Chapter 4 Adjustments and Settings for Recording 4-97
Notes
• When the file ID consists of less than 14 characters , enter spaces
in the remaining positions.
• Execute the file ID before saving data in the memory stick.
Otherwise, the file ID is not saved with the other data.
This file ID is saved in the memory stick with another data
To reset the file ID to the original one
Push the MIC/MENU knob to the CANCEL side before you enter the
last character (the 14th one), that is while the character table is displayed
on the screen.
The entered FILE ID is cancelled, and the original one appears.
To delete entered characters
1 Push the MIC/MENU knob until the character to be deleted is
highlighted.
Each time you push the MIC/MENU knob, the highlighted character
moves to the right one by one.
Or highlight the T or t in the character table, then press the MIC/
MENU knob. The highlighted character moves to the right or left
according to the selected direction.
2 Turn the MIC/MENU knob until DEL is highlighted on the
character table.
3 Press the MIC/MENU knob.
The character highlighted in step 1 is deleted and the next character
moves up to this position.