Filter
Top Products
3
Chapter 3 Recording and Playback 3-11
43
21
Continuous recording in other cases
After rewinding or fast forward, after removing the cassette, or on a tape
that has been partially recorded, you can obtain a continuous recording
by following the procedure below.
Note
If the tape is recorded with a format which is different from the format
for the camcorder selected on the MULT FORMAT page of the
MAINTENANCE menu, trecording may not continu smoothly. Noise
and so on occurs at the point where recordings are continued.
Continuous recording after rewinding or fast forward, after removing the
cassette, or on a tape that has been partly recorded
1 Looking in the viewfinder, press the PLAY button to start playback.
2 Press the STOP button at the desired point to begin recording. To
continue from the end of recording already on the tape, press the
STOP button immediately after the end of the previous recording
(within 0.5 seconds).
(Continued)