Filter
Top Products
115
“Memory Stick
” Operations
Inserting the “Memory Stick”
Insert a “Memory Stick” in the “Memory Stick” slot as far as it can go with the B mark
facing the grip belt as illustrated.
Removing the “Memory Stick”
Press the “Memory Stick” once lightly.
Notes
•If you insert the “Memory Stick” forcibly in the wrong direction, the “Memory Stick”
slot may be damaged.
•Do not insert anything other than a “Memory Stick” into the “Memory Stick” slot.
Doing so may cause a malfunction.
While the access lamp is lit or flashing
Do not shake or strike your camcorder because your camcorder is reading the data from
the “Memory Stick” or recording the data on the “Memory Stick.” Do not turn the
power off, remove the “Memory Stick” or remove the battery pack. Otherwise, image
data breakdown may occur.
If “ MEMORY STICK ERROR” appears
Reinsert the “Memory Stick” a few times. The “Memory Stick” may be damaged if the
indicator still appears. If this occurs, use another “Memory Stick.”
Access lamp
Using a “Memory Stick” – Introduction