Filter
Top Products
129
“Memory Stick
” Operations
Superimposing a still image in a “Memory Stick” on an image
– MEMORY MIX
The “Memory Stick” supplied with your camcorder is already stored with 20
images:
– For M. CHROM: 18 images (such as a frame) 101-0001 to 101-0018
– For C. CHROM: 2 images (such as a background) 101-0019 to 101-0020
Sample images
Sample images are protected (p. 154).
Notes
•You cannot use MEMORY MIX for moving pictures recorded on a “Memory Stick.”
•When the overlapping still image has a large amount of white, the thumbnail image of
the picture may not be clear.
•When recording in the mirror mode (p. 32), the image on the LCD screen does not
appear as a mirror-image.
Image data modified on a computer or recorded with other equipment
You may not be able to play modified images back with your camcorder.
Recording a superimposed image to the tape
Before operation
•Insert the “Memory Stick” containing the still images into your camcorder.
•Insert the tape for recording into your camcorder.
The POWER switch should be set to .
Operate by touching the panel.
(1) Press FN and select PAGE2 .
(2) Press MEM MIX. The image recorded on the “Memory Stick” appears in the
lower right corner of the screen.
(3) Press – (to see the previous image)/+ (to see the next image) in the lower right
corner of the screen to select the still image that you want to superimpose.
(4) Press the desired mode. The still image overlaps with the moving picture
during recording standby.
You cannot reselect the mode.
Press
OFF to return to PAGE2.
42
MEM
MIX
MEM MIX
MCCAM
LUMI
OVER–
LAP
OFF OK
MCCAM
CHROM
CAMCM
CHROM
M. LUMI
MEM MIX
OFF OK
101
101
Still image