Sony DCR-PC105 Camcorder User Manual


 
217
Additional Information
Remaining battery time indicator
If the power goes off although the remaining battery time indicator indicates that the
battery pack has enough power to operate, charge the battery pack fully again so that
the indication on the remaining battery time indicator is correct. Note, however, that
the correct battery indication sometimes will not be restored if it is used in high
temperatures for a long time or left in a fully charged state, or the battery pack is
frequently used. Regard the remaining battery time indication as the approximate
shooting time.
The E mark indicating little remaining battery time sometimes flashes depending on
the operating conditions or ambient temperature and environment even if the
remaining battery time is about 5 to 10 minutes.
How to store the battery pack
If the battery pack is not used for a long time, do the following once a year to maintain
proper function.
1. Fully charge the battery pack.
2. Discharge on your electronic equipment.
3. Remove the battery pack from the equipment and store it in a dry, cool place.
To use the battery pack up on your camcorder, leave your camcorder in tape
recording standby until the power goes off without a cassette inserted.
Battery life
The battery life is limited. Battery capacity drops little by little as you use it more and
more, and as time passes. When the available battery time is shortened considerably, a
probable cause is that the battery pack has reached the end of its life. Please buy a new
battery pack.
The battery life varies depending on how it is stored, operating conditions, and the
environment for each battery pack.
Disposal of the battery pack
Certain countries or regions may regulate diposal of the battery pack used to power this
product. Please consult with your local authority.
InfoLITHIUM is a trademark of Sony Corporation.
About the InfoLITHIUM battery pack