Filter
Top Products
211
Troubleshooting
Warning messages
If messages appear on the screen, check the following. See the page in parentheses
“( )” for details.
• CLOCK SET Set the date and time (p. 23).
• FOR ”InfoLITHIUM” Use an “InfoLITHIUM” battery pack (p. 16, 216).
BATTERY ONLY
• CLEANING CASSETTE The video heads are dirty (p. 222).
The x indicator and “ CLEANING CASSETTE”
message appear one after another on the screen.
• COPY INHIBIT You tried to record a picture that has a copyright
control signal (p. 214).*
1)
• FULL Erase unnecessary data (p. 111).*
1)
• 16BIT AUDIO MODE is set to 16BIT.*
1)
You cannot dub
new sound (p. 198).
• REC MODE REC MODE is set to LP. Or, the tape has been
recorded based on different TV color system from
that of your camcorder.*
1)
You cannot dub new sound
(p. 198).
• TAPE There is no recorded portion on the tape.*
1)
You
cannot dub new sound.
• ”i.LINK” CABLE i.LINK cable is connected.*
1)
You cannot dub new
sound (p. 102).
• FULL The “Memory Stick” is full (p. 123).*
1)
• - The write-protect tab on the “Memory Stick” is set to
LOCK (p. 113).*
1)
• NO FILE No image is recorded or recognized on the “Memory
Stick.”*
1)
• NO MEMORY STICK No “Memory Stick” is inserted.*
1)
• AUDIO ERROR You are trying to record an image with sound that
cannot be recorded by your camcorder on the
“Memory Stick” (p. 138).*
1)
• MEMORY STICK ERROR The “Memory Stick” data is corrupted.*
1)
• FORMAT ERROR The “Memory Stick” is not recognized (p. 114).*
1)
Check the format.
• PLAY ERROR The image is distorted and cannot be played
back.*
1)
*
2)
• REC ERROR Turn the power off once, then on again.*
1)
• INCOMPATIBLE The “Memory Stick” inserted is not compatible
MEMORY STICK with your camcorder.*
1)
*
1)
You hear the melody or beep sound.
*
2)
Reinsert the “Memory Stick” and play back.
(continued on the following page)