Filter
Top Products
130
(5) Press –/+ in the lower left corner of the screen to adjust the effect, then press
OK to return to PAGE2.
M. CHROM
The degree of the blue area in the still image which is to be swapped with a
moving picture
M. LUMI
The brightness of the area in the still image which is to be swapped with a
moving picture
C. CHROM
The degree of the blue area in the moving picture which is to be swapped
with a still image
M. OVERLAP
No adjustment necessary
(You can select M. OVERLAP only when the POWER switch is set to
CAMERA.)
(6) Press EXIT to return to FN.
(7) Press START/STOP to start recording.
To change the still image to be superimposed
Press –/+ in the lower right corner before step 5.
To cancel MEMORY MIX
Press OFF to return to PAGE2.
When you select M. OVERLAP
You cannot change the still image.
During recording
You cannot reselect the mode.
Superimposing a still image in a “Memory Stick” on an image
– MEMORY MIX