SVAT Electronics cv501-16ch Security Camera User Manual


 
32CV501 - 16CH
NETWORK SETUP
1. Access the Main Menu by pressing Menu or by using the Pop Up
Menu Bar. Move the mouse to the bottom of the display screen to
reveal the Pop Up Menu.
2. Select the Menu icon.
3. Select the NETWORK setup icon.
The network setup Menu is your gateway to viewing your footage
online. This Menu holds the information you need about your DVR to set
up on-line viewing. Note that for basic network setup, the values shown
on the screen are the values you will be using, and that you will not
need to set new values.
The Next Page has a quick description of the network setup menu items.
TERMS
MAIN MENU...continued
To Format the HDD:
1. Select HDD FORMAT SETUP.
2. Select
to enter the HDD Format Setup Menu.
3. Use the mouse wheel or directional keys to change from DISABLE to ENABLE.
4. Select to format your HDD.
5. You will be prompted to ensure that you really want to format the hard drive.
6. Select YES to format the hard drive, or NO to exit the Menu and not delete the stored footage. The selected button will looked as if it is
pressed in.
7. Press Menu or select the
to exit the HDD Management Menu or press the Menu button.
8. Press Menu or select the
to exit the Main Menu.
This will not erase any of your DVR settings.
IP Mode: Static vs. DHCP
DHCP: (Dynamic Host Conguration Protocol) address is the most common setup for home or oce networks. This allows the DVR to automatically
receive an IP address from the router. By default the IP MODE should be set to DHCP and this is acceptable in most situations.
static IP: is one that does not change. Static IP addresses are manually assigned by an administrator. Most home or oce networks today do not
use static IP addresses. If you are unsure of whether you need a static or dynamic IP address, please contact the person who setup your network or
your internet service provider (ISP). A static IP address would be benecial if your internal IP address changes often.