Filter
Top Products
11CV501 - 16CH
BUTTONS & CONNECTIONS...continued
Remote Control
Back Panel
1. Power Input– 12V 4. 16A
2. VGA OUT – Connection to a VGA monitor
3. Ethernet (LAN) connection – Connect to a router or modem
4. Alarm Input/Relay - Connects Alarm adapter
5. Audio Out - Connect to a speaker or amplier
6. RS-232/485 – Connects a PTZ (pan/tilt/zoom) adapter
7. Video Input – CH 1 to 16 – Camera connections
8. Audio In – Connects to an audio supported camera/
microphone (not included)
9. SPOT – Connects to a second monitor for camera viewing
purposes only (no menu access)
10. S-Video Monitor Connection
11. BNC Monitor output (Video Out)
1. Auto – Pressing this prompts the DVR to sequence through
the cameras
2. Record - Pressing this button prompts DVR to record
3. 1-16 – Camera buttons – Shows the individual camera
on screen
4. Menu Button – Opens and exits the main menu
5. Zoom – Pressing this turns the zoom function on
6. ID – Displays the DVR IR number on screen. Used to identify
the DVR if multiple DVR’s are used
7. Enter – Select button/Conrm Changes
8. Directional buttons – Moves the cursor up, down, left
and right
9. PTZ – Turns on PTZ (Pan tilt zoom) camera controls in live view
mode (PTZ camera not included)
10. VIEW – scrolls through the dierent camera views (4/9/13/16)
11. Rewind – Rewinds playback footage
12. Fast forward – Fast forwards playback footage
13. Play – Prompts and Playback/search menu to
playback footage
14. Stop – Stops playback footage and recording
15. Pause/Step Back – During playback, pressing this button will
pause the footage. Pressing it a second time will step back the
video footage a few minutes
16. Pause/Step Forward – Pauses playback footage and pressing
this button again will step forward the time by a few minutes