SVAT Electronics cv501-16ch Security Camera User Manual


 
62CV501 - 16CH
Other Options
Player: Allows you to download the DVR player software for your computer.
Mobile Viewer: Allows you to set up and/or congure settings on the mobile online viewer.
DVR Setting: Allows you to change settings that your DVR player has – the Menu works the same way as the Main Menu
(instructions written above).
3G MOBILE DEVICE PORT FORWARDING
This DVR is capable of being viewed on Windows Mobile and Symbian OS cellular phones. The protocol that is used to view is RTSP (Real
Time Streaming Protocol). This will require additional port forwarding steps on your router.
The ports that are required are listed on the RTSP SETUP section in the Menu of the DVR. By default the RTSP port 554 and an RTP port
range of 1024-10000 need to be forwarded to the Internal IP address of the DVR
FTP Server: Enter the Hostname or IP address of the FTP server.
Username: A username that has the proper permissions on the FTP server to create directories and add les.
Password: Enter the password for the username listed above.
Port: Enter the port the FTP server uses. The default port for FTP sites is 21.
Path: Enter the path to save the H.264 format video les.
Apply: Saves your Mail and FTP settings.
NETWORK VIEWING & PLAYBACK...continued
Follow the port forwarding instructions listed in “Conguring your Router (Port Forwarding) to view the DVR Externally Pg. 52” using the
proper RTSP and RTP ports
If using the default settings:
Forward port 554 using TCP/UDP to the Internal IP address of the DVR
Forward TCP and UDP port range 1024-10000 to the Internal IP address of the DVR
If the router requires each port to be entered individually then set up port forwarding rules for 1024, 1025, 1026, 1027, etc… Each
connected mobile device requires 4 open RTP ports to the DVR
To have three mobile phones connected to any of the DVR’s channel streams you will need to forward the rst 12 ports from the
RTP Port range (1024-1036) to the Internal IP address of the DVR
SETTING UP PORT FORWARDING
You can view an individual channel stream on your mobile device:
To view a live video feed from one of the cameras connected to your DVR you will need to enter a specic URL. The syntax for viewing
channel 3 is rtsp://IPADDRESS/CH03
Fill in the spot (above) called IPADDRESS with the external IP address of your DVR network found on http://www.whatsmyip.org
Note: Some phones do not require Port Forwarding for internal viewing over WiFi connection.