Filter
Top Products
18 en | Introduction Dinion IP
V 2.5 | 2007.6 Operating Instructions Bosch Security Systems
achieved quickly and easily. Video images from a single camera
can be simultaneously received on several receivers.
1.4.1 Wide dynamic range
The digital signal is automatically processed in the camera to
optimally capture the detail in both the high and low light areas
of the scene simultaneously, maximizing the information visible
in the picture.
1.4.2 Power-over-Ethernet
Power for the camera can be supplied via a Power-over-Ether-
net (IEEE 802.3af) compliant network cable connection. With
this configuration, only a single cable connection is required to
view, power and control the camera.
1.4.3 Receiver
MPEG-4 compatible hardware decoders (for example VIP XD)
can be used as a receiver. Computers with decoding software
such as VIDOS or computers with the Microsoft Internet
Explorer web browser installed can also be used as receivers.
1.4.4 Video encoding
The camera uses the MPEG-4 compression standard. Thanks to
efficient encoding, the data rate remains low even with high
image quality and can also be adapted to local conditions
within wide limits.
1.4.5 Tri Streaming
Tri Streaming allows the incoming data stream to be encoded
simultaneously according to three different, individually cus-
tomized profiles. This creates two MPEG4 streams per camera
that can serve different purposes, for example, one for local
recording and one optimized for transmission over the LAN, and
an additional JPEG stream for use with a PDA.
1.4.6 Recording
The camera can be used with an iSCSI server connected via the
network to store long-term recordings.