Filter
Top Products
Dinion IP Configuration via the browser | en 65
Bosch Security Systems Operating Instructions V 2.5 | 2007.6
2. Click Finish to complete the configuration. All settings are
now transferred to the unit and subsequently become
effective.
7.8.2 Partition status
1. Click Partition status.
– A window opens showing information on the high-
lighted partition. This window provides information
about the current configuration of the partition. No
changes can be made here.
2. Click OK to close the window.
7.8.3 Editing a partition
!
CAUTION! Changes to a partition lead to a re-organization
which results in the loss of all sequences stored on that
partition. Consequently, you should back up all important
sequences on the computer's hard drive before modifying the
partition.