Filter
Top Products
Dinion IP Configuration via the browser | en 83
Bosch Security Systems Operating Instructions V 2.5 | 2007.6
7.14.1 Alarm out
Select the event that will trigger the alarm output;
– an internal motion detection/VCA,
– an internal day/night switching, or
– an external trigger from the network.
For example, it is possible to switch on a spotlight in response
to a motion alarm and switch it off again when the alarm is over.
Relay name
The relay can be assigned a name here. The name is shown on
the button next to Trigger relay. The Livepage can also be con-
figured to display the name next to the relay icon.
Trigger relay
Click the button to switch the relay manually (for example for
testing purposes or to operate a door opener).