Filter
Top Products
Dinion IP Configuration via the browser | en 77
Bosch Security Systems Operating Instructions V 2.5 | 2007.6
7.12.2 Analysis type
Select the required analysis algorithm. By default, only Motion+
is available – this offers a motion detector and essential recog-
nition of tampering. The current alarm status is displayed for
information purposes.
7.12.3 Motion detector
Motion detection is available for the Motion+ analysis type. For
the detector to function, the following conditions must be met:
– Analysis must be activated.
– At least one sensor field must be activated.
– The individual parameters must be configured to suit the
operating environment and the desired responses.
– The sensitivity must be set to a value greater than zero.
i
NOTE!
On the Livepage configuration page, you can enable additional
information overlays for the live video image too (see “Livepage
configuration” on page 91).
i
NOTE!
Additional analysis algorithms with comprehensive functions
such as IVMD are available from Bosch Security Systems.
i
NOTE! Reflections of light (off glass surfaces, etc.), switching
lights on or off or changes in the light level caused by cloud
movement on a sunny day can trigger unintended responses
from the motion detector and generate false alarms. Run a
series of tests at different times of the day and night to ensure
that the video sensor is operating as intended.
i
NOTE!
For indoor surveillance, ensure constant lighting of the areas
during the day and at night.