Filter
Top Products
44 en | Configuration via the browser Dinion IP
V 2.5 | 2007.6 Operating Instructions Bosch Security Systems
7.2.2 Password protection
A camera is generally protected by a password to prevent unau-
thorized access to the unit. You can use various authorization
levels (User name:) to limit access.
User name
The camera recognizes three user names: service, user and live,
which correspond to different authorization levels.
– The user name service represents the highest authorization
level. After entering the corresponding password, you can
use it to access all the functions of the camera and change
all configuration settings.
– The user name user represents the middle authorization
level. You can use it to operate the unit and also to control
cameras, but you cannot change the configuration.
– The user name live represents the lowest authorization
level. It can only be used to view the live video image and
switch between the different live image displays.
Password
You can define and change a separate password for each user
name if you are logged on as Service or if the unit is not pro-
tected by a password. Enter the password for the selected user
name here.
Confirm password
Re-enter the new password to rule out typing mistakes.
i
NOTE! Proper password protection is only guaranteed if all
higher authorization levels are also protected with a password.
For example, if a live password is assigned, a service and a user
password should also be set. When assigning passwords, you
should always start from the highest authorization level.