Filter
Top Products
58 en | Configuration via the browser Dinion IP
V 2.5 | 2007.6 Operating Instructions Bosch Security Systems
7.5.4 Installer options
Select the synchronization method for the camera: Internal for
free running camera operation; Line Lock to lock to the power
supply frequency. You can disable the buttons on the camera to
prevent unauthorized change of the camera settings.
– Click Restore all defaults to restore the factory defaults.
– A confirmation screen appears. Allow 5 seconds for
the camera to optimize the picture after a mode reset.
7.6 Recording
You can record the images from the camera in the RAM memory
of the unit or in an appropriately configured iSCSI storage
device. Local RAM memory is suitable for short-term recordings
and pre-alarm recordings in Ring mode operation. For long-
term, authoritative images, it is essential that you use appropri-
ately sized iSCSI storage. It is also possible to let the Video
Recording Manager (VRM) control all recording when accessing
an iSCSI server. The VRM is an external program that configures
recording tasks for video servers. For further information, con-
tact your local customer service at Bosch Security Systems.