Filter
Top Products
82 en | Configuration via the browser Dinion IP
V 2.5 | 2007.6 Operating Instructions Bosch Security Systems
sent to the mail server via the address you entered. Otherwise
leave the box blank (0.0.0.0).
7.13.3 Layout
You can select the data format of the alarm message.
– Standard (with JPEG): e-mail with JPEG image file attach-
ment.
– SMS: e-mail in SMS format to an e-mail-to-SMS gateway
(for example to send an alarm by cellphone) without an
image attachment.
7.13.4 Destination address
Enter the e-mail address for alarm e-mails here. The maximum
address length is 49 characters.
7.13.5 Sender name
Enter a unique name for the e-mail sender, for example the
location of the unit. This makes it easier to identify the origin of
the e-mail.
7.13.6 Send e-mail for testing
Test the e-mail function by clicking Send now. An alarm e-mail
is immediately created and sent.
7.14 Relay Settings
Here, you can make the settings for the alarm sources and
alarm connections.
i
NOTE! When a cellphone is used as the receiver, make sure to
activate the e-mail or SMS function, depending on the format,
so that these messages can be received. You can obtain
information on operating your cellphone from your cellphone
provider.