Bosch Power Tools NWC45510P Digital Camera User Manual


 
28 en | Quick set-up Dinion IP
V 2.5 | 2007.6 Operating Instructions Bosch Security Systems
Use the up or down keys to scroll up or down through a
menu.
Use the left or right keys to move through options or to set
parameters.
When in a menu, quickly pressing the menu/select key
twice restores the selected item to its factory default.
To close all menus at once from any menu, select the Exit
item and hold down the menu/select key until the menu
display disappears.
4.2.2 Install menu
Install lens wizard submenu
4.3 Adjustment procedure DC-iris Lens
1. Unlock the back focus locking button.
2. Access the Lens Wizard menu.
3. Set Back Focus Now is highlighted in the menu.
Function Selection Description
Lens Wizard Select submenu Select to optimize camera lens combination
Network Select submenu Select to set the network IP address for the cam-
era (default address is 192.168.0.1)
Exit Exit the menu
Function Selection Description
Lens Type AUTO, MANUAL,
DCIRIS, VIDEO
In AUTO mode the camera auto detects the type of
lens used or force the camera into a mode.
Detected If the LENS TYPE detection is in AUTO, the
detected lens type is shown.
Set Back
Focus Now
Select to force lens to its maximum opening. After
focusing the lens the object of interest remains in
focus in bright and low light conditions.
Set LVL (Video iris lenses only). The level detector indica-
tor must be set to the center by adjusting the level
potentiometer on the lens, to obtain the best pic-
ture performance.
Exit Return to the INSTALL menu