Filter
Top Products
Dinion IP Configuration via the browser | en 73
Bosch Security Systems Operating Instructions V 2.5 | 2007.6
2. Click Stop to deactivate the recording schedule. Record-
ings that are currently running are interrupted and the con-
figuration can be modified.
7.10.2 Recording status
The graphic indicates the recording activity in this partition. You
will see an animated graphic while recording is taking place.
7.11 Alarm Settings
7.11.1 Alarm in
You can configure the possible alarm triggers for the camera.
Alarm input Select Active Low if the alarm is to be triggered by
closing the contact. Select Active High if the alarm is to be trig-
gered by opening the contact.
Action
Select how the camera responds to an incoming alarm. The
camera can either switch the camera settings profile (not the
recordings profile) or switch to Night mode. If None is selected,
the alarm will only be forwarded via the IP connection.
Name
You can enter a name for each alarm input, which is then dis-
played below the icon for the alarm input on the Livepage dur-
ing configuration.