Filter
Top Products
Dinion IP Configuration via the browser | en 47
Bosch Security Systems Operating Instructions V 2.5 | 2007.6
9. When you are finished, click OK to save and activate the
table.
Time server IP address
Enter the IP address of a time server.
Time server type
Choose the protocol used by the selected time server.
It is recommended that you choose the SNTP server protocol.
This protocol provides higher accuracy and is required for cer-
tain applications, as well as for future additions.
Choose Time server, if the server uses RFC 868 as protocol.
7.3 Display Settings
7.3.1 Display stamping
Various overlays or stamps in the video image provide impor-
tant supplementary information. These overlays can be enabled
individually and arranged on the image in a clear manner.
Camera name stamping
This field sets the position of the camera name overlay. It can
be displayed at the Top, at the Bottom or at a position of your
choice using the Custom option. Or it can be set to Off if no
overlay of this information is to be shown.
Time stamping
This field sets the position of the time and date overlay. It can
be displayed at the Top, at the Bottom or at a position of your
choice, which you have pre-defined using HyperTerminal, using
the Custom option. Or it can be set to Off if no overlay of this
information is to be shown.