Filter
Top Products
94 en | Configuration via the browser Dinion IP
V 2.5 | 2007.6 Operating Instructions Bosch Security Systems
7.15.7 Maintenance
Firmware update
The camera functions and parameters can be updated with
firmware. To do this, the current firmware package is trans-
ferred to the unit via the network. The firmware is installed
there automatically. Thus a camera can be serviced and
updated remotely without requiring a technician to make
changes to the unit on site. The latest firmware can be obtained
from your customer service center or from the
Bosch Security Systems download area.
i
NOTE!
The activation key cannot be deactivated again and is not
transferable to other units.
!
CAUTION! Before starting the firmware update, make sure that
you have selected the correct upload file! Uploading the wrong
files can result in the unit no longer being addressable,
requiring it to be replaced.
!
CAUTION! Do not interrupt the firmware installation for any
reason! Interruption may lead to faulty coding of the Flash
EPROM. This can result in the unit no longer being addressable,
requiring it to be replaced.