Filter
Top Products
62 en | Configuration via the browser Dinion IP
V 2.5 | 2007.6 Operating Instructions Bosch Security Systems
7.7.7 Initiator name
The initiator name is automatically displayed after a connection
has been established.
7.7.8 Initiator extension
Enter the initiator extension. For the sake of clarity, you can
enter a name or the existing extension with a comment, for
example "– Camera 2".
7.7.9 Decoupling the drive used
Each drive can only be associated with one user. If a drive is
already being used by another person, you can decouple the
drive and connect the drive with the camera.
1. Double-click a drive that is already being used in the LUN
map. You will see a warning message.
2. Confirm the decoupling of the current user. The drive is
released and can be connected to the camera.
7.7.10 Storage information
The status of the currently selected storage medium and the
data throughput are displayed here for information. You cannot
change any of these settings.
1. Click Log to view a status report with logged actions. A
new window opens.
2. In this window, click Delete to delete all entries. Entries
are deleted immediately; you cannot undo this process.
3. Click Close to close the window.