Filter
Top Products
Dinion IP Configuration via the browser | en 45
Bosch Security Systems Operating Instructions V 2.5 | 2007.6
7.2.3 Language selection
Website language
Select the language for the user interface here.
7.2.4 Date and time
Date format
Choose the desired date format here
(Europe: DD.MM.YYYY; USA: MM.DD.YYYY; Japan: YYYY/MM/
DD).
Unit date and time
If there are a number of devices operating in your system or
network, it is important to synchronize their internal clocks. For
example, it is only possible to carry out correct identification
and evaluation of recordings occurring at the same time if all
devices are operating on the same time.
1. Enter the current date. Since the unit time is controlled by
the internal clock, it is not necessary to enter the day of
the week. This is added automatically.
2. Enter the current time or click Synchr. PC to apply the sys-
tem time from your computer to the camera.
i
NOTE! The new password is then saved by clicking the Set
button. You should therefore click the Set button immediately
after entering and confirming the password, even if you also
want to assign a password to another user name.