Open as PDF
Before using the <5> dial, set the power switch to <J>.
After pressing a button, turn the
When you press a button, its function
remains selected for 6 seconds (9).
During this time, you can turn the <
dial to set the desired setting.
When the function turns off or if you
press the shutter button halfway, the
camera will be ready to shoot.
Use this dial to select or set the white
balance, drive mode, flash exposure
compensation, and AF point.
Turn the <5> dial only.
While looking at the viewfinder or LCD panel,
turn the <
> dial to set the desired setting.
Use this dial to set the exposure
compensation amount, the aperture setting
for manual exposures, and other settings.
The <9> consists of eight direction
keys and a button at the center.
Use it to select the AF point, correct the
white balance, select the focusing
frame during Live View shooting, or
scroll the image during magnified view.
You can also use it to select menus.
] and [
<5> Using the Quick Control Dial for Selecting
<9> Operating the Multi-controller
You can also operate (1) when the power switch is set to <1>.