Canon 1901B004 Digital Camera User Manual

By changing the shutter speed or aperture automatically, the camera
brackets the exposure up to ±2 stops in 1/3-stop increments for three
successive shots. This is called AEB.
* AEB stands for Auto Exposure Bracketing.
Select [AEB].
Under the [2] tab, select [AEB], then
press <0>.
Set the AEB amount.
Turn the <5> dial to set the AEB
amount, then press <0>.
X When you exit the menu, <h> and
the AEB level will be displayed on the
LCD panel.
Take the picture.
Focus and press the shutter button
completely. The three bracketed shots
will be taken in this sequence: Standard,
decreased, and increased exposure.
Follow steps 1 and 2 to set the AEB amount to < >.
AEB will be canceled automatically when you set the power switch
to <2> or the flash is ready to fire.
3 Auto Exposure Bracketing (AEB)N
AEB amount
Canceling AEB
If the drive mode is set to <u>, you must press the shutter button three
times. When <o> or <i> is set and you hold down the shutter button
completely, the three bracketed shots will be taken continuously. Then
the camera will stop shooting. When <j> or <l> is set, the three
bracketed shots will be taken after a 10-sec. or 2-sec. delay.
AEB can be combined with exposure compensation.
Neither flash nor bulb exposures can be used with AEB.