Filter
Top Products
169
Exposure compensation can brighten (increased exposure) or darken
(decreased exposure) the standard exposure set by the camera.
Exposure compensation can be set in the d/s/f shooting modes.
Although you can set the exposure compensation up to ±5 stops in 1/3-
stop increments, the exposure compensation indicator in the viewfinder
and on the LCD panel can only display the setting up to ±3 stops. If you
want to set the exposure compensation setting beyond ±3 stops, you
should use the Quick Control (p.49) or follow the instructions for [z2:
Expo.comp./AEB] on the next page.
1
Check the exposure level indicator.
Press the shutter button halfway (
0
)
and check the exposure level indicator.
2
Set the exposure compensation
amount.
While looking at the viewfinder or
LCD panel, turn the <5> dial.
If it cannot be set, set the <
R
>
switch to the left, then turn the <
5
> dial.
3
Take the picture.
To cancel the exposure
compensation, set the exposure
compensation amount back to <E>.
Setting Exposure CompensationN
Increased exposure for a
brighter image
Decreased exposure for a
darker image
If [
z2: Auto Lighting Optimizer
] (p.142) is not set to [
Disable
], the image
may still look bright even if a darker exposure compensation amount has been set.
The exposure compensation amount will remain in effect even after you
set the power switch to <2>.
After setting the exposure compensation amount, you can set the
<R> switch to the right to prevent the exposure compensation
amount from changing accidentally.
If the exposure compensation amount exceeds ±3 stops, the end of the
exposure level indicator will display <I> or <J>.