Filter
Top Products
362
Troubleshooting Guide
If you shoot something that has fine detail (such as a field of grass),
the file size will be larger and the actual maximum burst may be lower
than the number mentioned on page 121.
If [z3: Highlight tone priority] is set to [Enable], the settable ISO
speed range will be ISO 200-25600 (or up to 12800 for movie
shooting). Even if you expand the settable ISO speed range in [ISO
speed range], you cannot set expanded ISO speeds (L, H, H1, H2).
When [z3: Highlight tone priority] is set to [Disable], ISO 100/125/
160 can be set (p.146).
If [z3: Highlight tone priority] is set to [Enable], the Auto Lighting
Optimizer cannot be set. When [z3: Highlight tone priority] is set to
[Disable], then the Auto Lighting Optimizer can be set (p.146).
Set [
z
2: Auto Lighting Optimizer
] to [
Disable
]. When [
Standard/Low/
High
] is set, even if you set a decreased exposure compensation or flash
exposure compensation, the image may come out bright (p.169).
If [On:ContShtng] is set, Live View display, image review after image
capture, and image playback are not possible during shooting (p.177).
When the image-recording quality is set to 41 or 61, the
multiple-exposure image will be recorded in 1 quality (p.183).
The maximum burst during continuous shooting is lower.
ISO 100 cannot be set. ISO speed expansion cannot be selected.
The Auto Lighting Optimizer cannot be set.
Even though I set a decreased exposure compensation, the
image comes out bright.
The Live View image or movie shooting image is not
displayed during multiple-exposure shooting.
The multiple-exposure image is shot in 1 quality.