Filter
Top Products
200
A Shooting with the LCD Monitor
Each time you press the <B> button, the information display will
change.
About the Information Display
ISO speed
Possible shots
Exposure level
Aperture
Shutter speed
HDR shooting/
Multiple exposures
Battery check
Exposure
simulation
Drive mode
White balance
Flash exposure
compensation
AF mode
• d: Live mode
• c : Face detection Live
mode
• f: Quick mode
AF point (Live mode)
FEB
Magnification/
Magnifying position
Highlight tone priority
Histogram
Image-recording quality
AE lock
Flash-ready
Picture Style
Eye-Fi card transmission status
Card for recording/
playback
Digital compass
Auto Lighting Optimizer
Shooting mode
AEB
GPS connection indicator
The histogram can be displayed when [Expo. simulation: Enable] is set
(p.205).
You can display the electronic level by pressing the <
B
> button (p.60).
Note that if the AF mode is set to [
u
Live mode
] or the camera is connected
to a TV set with an HDMI cable, the electronic level cannot be displayed.
When <g> is displayed in white, it indicates that the Live View image
brightness is close to what the captured image will look like.
If <g> is blinking, it indicates that the Live View image is not being
displayed at the suitable brightness due to low- or bright-light conditions.
However, the actual image recorded will reflect the exposure setting.
If flash is used or bulb is set, the <g> icon and histogram will be
grayed out (for your reference). The histogram may not be properly
displayed in low- or bright-light conditions.