Filter
Top Products
262
k Playing Movies
Function Playback Description
2 Exit Returns to the single-image display.
7 Play Pressing <0> toggles between play and stop.
8 Slow motion
Adjust the slow motion speed by turning the <5> dial.
The slow-motion speed is indicated on the upper right.
5 First frame Displays the movie’s first frame.
3 Previous frame
Each time you press <0>, the previous frame is
displayed. If you hold down <0>, it will rewind the movie.
6 Next frame
Each time you press <0>, the movie will play frame-by-
frame. If you hold down <0>, it will fast forward the
movie.
4 Last frame Displays the movie’s last frame.
X Edit Displays the editing screen (p.263).
Playback position
mm’ ss”
Playback time (minutes:seconds with [Movie play count:
Rec time] set)
hh:mm:ss:ff
Time code (hours:minutes:seconds:frames with [Movie
play count: Time code] set)
Volume
You can adjust the built-in speaker’s (p.261) volume by
turning the <6> dial.
With a fully-charged Battery Pack LP-E6, the continuous playback time
at 23°C/73°F will be as follows: approx. 3 hr. 30 min.
By connecting commercially-available headphones equipped with a 3.5
mm stereo mini plug to the camera’s headphone terminal (p.19), you can
listen to the movie’s sound (p.235).
If you connect the camera to a TV set (p.268, 271) to play back a movie,
adjust the sound volume with the TV set. (Turning the <6> dial will not
adjust the sound volume.)
If you took a still photo while you shot the movie, the movie image
displayed will look still for approx. 1 sec..