Filter
Top Products
181
P Multiple ExposuresN
You can select an image recorded in the card as the first single
exposure. The original of the selected image will remain intact.
You can only select 1 images. You cannot select 41/61 or
JPEG images.
1
Select [Select image for multi. expo.].
Select [Select image for multi.
expo.], then press <0>.
X
The images in the card will be displayed.
2
Select an image.
Turn the <5> dial to select the
image to be used as the first single
exposure, then press <0>.
Turn the <5> dial to select [OK].
X
The file No. of the selected image will be
displayed at the bottom of the screen.
3
Take the picture.
When you select the first image, the
number of remaining exposures as
set with [No. of exposures] will
decrease by 1. For example, if [No. of
exposures] is 3, you can shoot two
exposures.
Merging multiple exposures with an image recorded in the card
Images shot with highlight tone priority set to [Enable] cannot be
selected as the first single exposure.
Auto Lighting Optimizer, peripheral illumination correction and chromatic
aberration correction will be disabled, regardless of the settings of the
1 image selected as the first single exposure.
The ISO speed, Picture Style, high ISO speed noise reduction, and color space,
etc. set for the first
1
image will also be set for the subsequent images.
If the first 1 image’s Picture Style is [Auto], the [Standard] Picture
Style will be set for the subsequent images.
You cannot select an image taken with another camera.