Filter
Top Products
205
3 Menu Function Settings
Exposure simulationN
Exposure simulation displays and simulates how the brightness of the
actual image (exposure) will look.
• Enable (g)
The displayed image brightness will be close to the actual
brightness (exposure) of the resulting image. If you set exposure
compensation, the image brightness will change accordingly.
• During e
Normally, the image is displayed at the standard brightness to
make the Live View image easy to see. The image will be
displayed close to the actual brightness (exposure) of the resulting
image only while you hold down the depth-of-field preview button.
• Disable (E)
The image is displayed at the standard brightness to make the Live
View image easy to see. Even if you set exposure compensation,
image is displayed at the standard brightness.
For asterisked image-recording quality, the pixel count does not exactly
match the set aspect ratio.
The image area displayed for the asterisked aspect ratio is slightly larger
than the recorded area. Check the captured images on the LCD monitor
when shooting.
If you use a different camera to directly print images shot with this
camera in the 1:1 aspect ratio, the images may not be correctly printed.
With [82: LV shooting area display], you can set the display method for
the shooting area (p.318).
If you set an expanded ISO speed setting as [Maximum] in [ISO speed
range], Live View shooting will be possible under darker conditions.
Even if a low ISO speed is set, noise may be noticeable in the displayed
Live View image under low light. However, when you shoot, the image
recorded will have minimal noise. (The image quality of the Live View
image is different from that of the recorded image.)