360
Troubleshooting Guide
The camera cannot be used with EF-S lenses (p.39).
Install a recharged battery pack in the camera (p.28).
The card is not properly inserted (p.31).
If you are using an SD card, slide the card’s write-protect switch to the
Write/Erase setting (p.31).
If the card is full, replace the card or delete unnecessary images to
make room (p.31, 277).
If you try to focus in the One-Shot AF mode while the focus
confirmation light <o> in the viewfinder blinks, a picture cannot be
taken. Press the shutter button halfway again to refocus automatically,
or focus manually (p.44, 111).
If a card error message is displayed, see page 33 or 371.
Cards with capacities greater than 128 GB are formatted in exFAT.
This means that if you format a card with a capacity over 128 GB with
this camera and then insert it into another camera, an error may be
displayed and it may not be possible to use the card.
Shooting-Related Problems
The lens cannot be attached.
The viewfinder is dark.
No images can be shot or recorded.
The card cannot be used.
An error message is displayed when the card is inserted in
another camera.