Filter
Top Products
227
k Shooting Movies
Notes on Movie Shooting
The final image simulation is a function that allows you to see the
effects of the Picture Style, white balance, etc., on the image.
During movie shooting, the image displayed will automatically reflect
the effects of the settings listed below.
Final image simulation for movies
Picture Style
* All settings such as sharpness, contrast, color saturation, and color tone will
be reflected.
White balance
White balance correction
Exposure
Depth of field
Auto Lighting Optimizer
Peripheral illumination correction
Chromatic aberration correction
Highlight tone priority
Final Image Simulation
You can use Remote Controller RC-6 (sold separately, p.186) to start
and stop the movie shooting if the drive mode is <Q> or <k>. Set
the shooting timing switch to <2> (2-sec. delay), then press the transmit
button. If the switch is set to <o> (immediate shooting), still photo
shooting will take effect.
With a fully-charged Battery Pack LP-E6, the total movie shooting time
will be as follows: approx. 1 hr. 30 min. at room temperature (23°C/73°F),
and approx. 1 hr. 20 min. at low temperatures (0°C/32°F).