Filter
Top Products
366
Troubleshooting Guide
To shoot still photos during movie shooting, using a CF card
compatible with UDMA transfer rates is recommended.
Setting a lower image quality for still photos and shooting fewer
continuous still photos can also resolve the problem.
Shooting still photos during movie shooting will cause a discrepancy
between the actual time and time code. When you want to edit a movie
using time code, it is recommended not to shoot still photos during
movie shooting.
Set the <R> switch to the left (lock release, p.47).
Check the [82: Multi function lock] setting (p.319).
Check the [82: Custom Controls] setting (p.321).
In the <A> mode, only certain menu tabs and options are displayed.
Set the shooting mode to <d/s/f/a/F> (p.51).
Set the color space to sRGB. If Adobe RGB is set, the first character
will be an underscore (p.158).
When I shoot still photos during movie shooting, the movie shooting stops.
Time code is off.
Operation Problems
I cannot change the setting with <6>, <5>, or <9>.
The camera button/dial’s function has changed.
Display Problems
The menu screen shows few tabs and options.
The file name’s first character is an underscore (“_”).