Filter
Top Products
Chapter 1 Overview
Planning for Your Installation
1-4
Cisco Video Surveillance Manager Getting Started Guide, Release 4.2/6.2
OL-19733-01
Information Required for Configuring a Multi Services Platform
Table 1-3 lists the information that you need as you perform the initial
configuration of a Multi Services Platform. You may find it convenient to
determine and record this information before you begin the configuration
procedure. You can obtain this information from your network administrator.
When you configure an MSP, make a note which VSM components will run on it.
This information will help you assign the appropriate IP address or host name to
the MSP.
Ta b l e 1-3 Information for Multi Services Platform Configuration
Medium Phillips-head screwdriver. Used to attach rack rails to the Multi
Services Platform chassis.
Assistance from at least one other
person.
A Multi Services Platform is heavy.
Table 1-2 Required Items
Item Description
Description
VSM components to run on this MSP.
Value
Component (check all that apply): VSMS VSVM VSOM
Description
IP address for the Multi Services Platform.
Value
IP address
Description
Host name for the Multi Services Platform.
Value
Host name
Description
Subnet mask for the Multi Services Platform.
Value
Subnet
mask