Cisco Systems 2 Security Camera User Manual


 
3-21
Cisco Video Surveillance Manager Getting Started Guide, Release 4.2/6.2
OL-19733-01
Chapter 3 Configuring VSM
Configuring VSM
Figure 3-30 Encoder Drop-Down List
e. From the Encoder Channel drop-down list (see Figure 3-31), choose the
video encoder input port that the camera connects to.
Figure 3-31 Encoder Channel Drop-Down List
Step 6 In the Camera Feed area in the Camera Type tab, take these actions:
a. From the Server drop-down list (see Figure 3-32), choose the VSMS that is
to manage the camera feed.
This list displays the servers that you configured as described in the “Adding
Servers” section on page 3-6.