Filter
Top Products
3-27
Cisco Video Surveillance Manager Getting Started Guide, Release 4.2/6.2
OL-19733-01
Chapter 3 Configuring VSM
Configuring VSM
Step 2 In the VSOM Operator page, click the Admin link, which appears near the top left
of the page. (see
Figure 3-40).
Figure 3-40 Admin Link
The Administration area appears.
Step 3 Click IP/Network Cameras under Devices in the left panel of the VSOM
Operator page.as shown in
Figure 3-41.
Figure 3-41 Accessing the IP/Network Cameras Area
.
The IP/Network Cameras area appears.
Step 4 In the IP/Network Cameras area, click Add a New IP/Network Camera.