Filter
Top Products
2-7
Cisco Video Surveillance Manager Getting Started Guide, Release 4.2/6.2
OL-19733-01
Chapter 2 Setting Up and Configuring the Multi Services Platform
Mounting the Multi Services Platform in a Rack
Figure 2-1 Attaching Inner Rack Rails
a. Place the inner rack rail on one side of the chassis, aligning the hooks of the
chassis with the holes in the rail.
The rail marked R attaches to the right of the chassis as you face the front of
the chassis. The rail marked L attaches to the left. The wheels on the rails
should face away from the chassis and the locking tabs on the rails should
face the bottom of the chassis.
b. Slide the rail toward to front of the chassis.
c. Secure the rail to the chassis with four 1/2 inch (6.35 mm) screws (provided).
d. Repeat this step for the other inner rack rail.
Step 2 Attach the outer rack rails to the Multi Services Platform.
There are two outer rack rails. One attaches to each side of the rack and each
connects to an inner rack rail to hold the Multi Services Platform in place. Each
outer rack rail consists of two brackets. The brackets allow the rails to extend
between 30 inches and 33 inches so that they can fit racks of various sizes. To
attach these rails, see
Figure 2-2 and perform the actions that follow.