Filter
Top Products
Chapter 3 Configuring VSM
Configuring VSM
3-16
Cisco Video Surveillance Manager Getting Started Guide, Release 4.2/6.2
OL-19733-01
Figure 3-20 Host IP/Name Field
Step 6 If the video encoder allows access from VSMS only if VSMS provides valid
authentication credentials, take these actions in the Authentication area in the
Details Tab:
a. In the Username field (see Figure 3-21), enter the user name that VSMS
provides when accessing the video encoder.
The user name is configured on the video encoder and the value that you enter
in this field must match the configured name exactly. The user name can
contain alphabetic and numeric characters only and is case sensitive.
Figure 3-21 Username Field
b. In the New Password field (see Figure 3-22), enter the password that VSMS
provides when accessing the video encoder.
The password is configured on the video encoder and the value that you enter
in this field must match the configured password exactly. The password can
contain alphabetic and numeric characters only and is case sensitive.