Filter
Top Products
Chapter 3 Configuring VSM
Configuring VSM
3-18
Cisco Video Surveillance Manager Getting Started Guide, Release 4.2/6.2
OL-19733-01
Procedure
Step 1 Access the VSOM Operations Manager as described in the “Accessing Video
Surveillance Operations Manager” section on page 3-5
Step 2 In the VSOM Operator page, click the Admin link, which appears near the top left
of the page (see
Figure 3-24).
Figure 3-24 Admin Link
The Administration area appears.
Step 3 Click Analog Cameras under Devices in the left panel of the VSOM Operator
page, as shown in
Figure 3-25.
Figure 3-25 Accessing the Analog Cameras Area
.
The Analog Camera area appears.